CBCKX - AQUATAPOXY COATING SYSTEM A-6, PART A, 35-140

  • MSDS: CBCKX
  • Manufacturer: AMERICAN CHEMICAL CORP
  • Product Name: AQUATAPOXY COATING SYSTEM A-6, PART A, 35-140
  • National Stock Number: 8030-00N064016
Product Identification

Product ID:AQUATAPOXY COATING SYSTEM A-6, PART A, 35-140
MSDS Date:01/18/1993
FSC:8030
NIIN:00N064016
Kit Part:Y
MSDS Number: CBCKX

Responsible Party
AMERICAN CHEMICAL CORP
5231 NORTHRUP AVE
ST LOUIS, MO 63110
US

Emergency Phone: 800-633-0247

Info Phone: 314-664-5749

Cage: OBTX0

Contractor
KING ADHESIVES CORP
ST LOUIS, MO 63110 US

Telephone: 314-772-9953/800-233-8171

Cage: 0SS34

Ingredients

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 8-11%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST


EPOXY RESIN

CAS: 25085-99-8

OSHA PEL N/K

ACGIH TLV: N/K


EPOXY RESIN

CAS: 25936-38-6

OSHA PEL N/K

ACGIH TLV: N/K


MAGNESIUM ALUMINUM SILICATE; (HYDROUS ALUMINUM SILICATE)

CAS: 8031-18-3

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:LD50 (ORAL RAT): > 4000 MG/KG.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: MAY CAUSE SLIGHT
TRANSIENT (TEMPORARY) IRRIT. SKIN: MAY CAUSE ALLERGIC RXN IN
SUSCEPTIBLE PERS. RPTD EXPOS MAY CAUSE IRRIT. INGEST: SINGLE DOSE
ORAL TOXICITY LOW. A POORLY CHARACT SAMPLE OF LOW MOLECULAR WT
EPOXY RESIN OF THISTYPE (DIGLYCIDYL ETHER OF BISPHENOL A) HAS BEEN
REPORTED TO (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: PRODUCE SKIN CANCER IN A HIGHLY
SENSITIVE STRAIN OF MICE. HOWEVER, HIGH LEVELS OF IMPURITIES (INCL
KNOWN ANIMAL SKIN CARCIN) COMPROMISE VALIDITY OF FINDINGS. EPOXY
RESIN THAT IS REPRESENTATI VE OF CURRENT MFG PROCESSES IS NOT
BELIEVED TO BE CANCER HAZ TO HUMANS. RSLTS OF MUTAGENICITY TESTS IN
ANIMALS (SUP DAT)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES: FLUSH WITH LARGE QUANTITIES OF WATER FOR AT LEAST 15
MINUTES. CONSULT MD. SKIN: WASH OFF IN FLOWING WATER OR SHOWER.
INHALATION: REMOVE TO FRESH AIR IF EFFECTS OCCUR. CONSULT MD.
INGESTION: NO A DVERSE EFFECTS ANTICIPATED BY THIS ROUTE OF
EXPOSURE INCIDENTAL TO PROPER INDUSTRIAL HANDLING. CALL MD
IMMEDIATELY .

Fire Fighting

Flash Point Method:TCC
Flash Point:>200F,>93C
Extinguishing Media:USE FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. WATER MAY BE HELPFUL IN KEEPING ADJACENT CONTRS COOL. AVOID
SPREADING BURNING LIQ W/WATER USED (SUP DAT)
Unusual Fire/Explosion Hazard:KEEP WORK AREAS FREE OF HOT METAL
SURFACES AND OTHER SOURCES OF IGNITION.

Accidental Release

Spill Release Procedures:KEEP SOURCES OF IGNITION AND HOT METAL
SURFACES ISOLATED FROM THE SPILL. MATERIAL MAY FLOW SLOWLY. SCRAPE
INTO CONTAINERS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN
USE. AVOID PROLONGED OR REPEATED CONTACT WITH SKIN. DO NOT HANDLE
OR STORE NEAR FLAME, HEAT OR STRONG OXIDANTS.
Other Precautions:DO NOT STORE IN DIRECT SUNLIGHT. AVOID PROLONGED
STORAGE ABOVE 38C (100F).

Exposure Controls

Respiratory Protection:RESPIRATORY PROTECTION SHOULD NOT BE NEEDED. IF
RESPIRATORY IRRITATION IS EXPERIENCED, USE A NIOSH/MSHA APPROVED
AIR-PURIFYING RESPIRATOR.
Ventilation:GENERAL MECHANICAL VENT IS SUFFICIENT FOR MOST CONDITIONS.
LOCAL EXHAUST VENT MAY BE NECESSARY FOR SOME OPERATIONS.
Protective Gloves:IMPERMEABLE GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:WEAR CLEAN, LONG-SLEEVED, BODY-COVERING
CLTHG. EMERGENCY EYEWASH & DELUGE SHOWER MEETING ANSI DESIGN
CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRE FIGHT PROC: FOR COOLING PURPOSES. HLTH HAZ: HAVE BEEN NEGATIVE.
HAS BEEN SHOWN TO BE NEGATIVE IN SOME INVITRO ("TEST TUBE")
MUTAGENICITY TESTS & POSITIVE IN OTHERS.

Chemical Properties

Boiling Pt:B.P. Text:>200F,>93C
Spec Gravity:1.07
Solubility in Water:NEGLIGIBLE
Appearance and Odor:HEAVY PAINT CONSISTENCY, WITH FAINT EPOXY ODOR
Percent Volatiles by Volume:<1

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND BASES, SELECTED AMINES, OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:THERMAL DECOMPOSITION IN THE PRESENCE
OF AIR MAY YIELD CARBON MONOXIDE AND CARBON DIOXIDE.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.